Quick Answer: The Battery Eliminator AC/DC supplies either AC or DC, chosen on the front panel, at 2, 4, 6, 8, 10 or 12 V and up to 2.0 A continuous.
Last updated: October 2026
Key Features
AC or DC output, selected on the front panel
Voltage taps: 2, 4, 6, 8, 10 and 12 V
2.0 A continuous current
Copper-wound step-down transformer; silicon diode full-wave bridge for the DC output
Primary-side fuse and colour-coded 4 mm sockets
Cold-rolled steel chassis
Technical Specifications
Specification
Value
Input
220 V – 240 V AC, 50/60 Hz
Output type
AC and DC, selectable
Voltage taps
2, 4, 6, 8, 10, 12 V
Current
2.0 A continuous
Rectification
Silicon diode full-wave bridge (DC)
Protection
Primary-side fuse
Terminals
4 mm sockets, colour-coded
Chassis
Cold-rolled steel
About This Product
Having AC and DC from one unit means a single supply can run rectifier and induction experiments as well as the usual DC circuit practicals. It is used in secondary and vocational physics labs in place of batteries and separate transformers. The Battery Eliminator AC/DC can be supplied on export terms to Albania, Papua New Guinea, Luxembourg, Belgium, Ghana and Venezuela.
Frequently Asked Questions
Can the Battery Eliminator AC/DC give both AC and DC?
Yes. The output type is selected on the front panel, at 2, 4, 6, 8, 10 or 12 V.
.png)
.png)
.png)
.png)
.png)
.png)
